|
Cranked
Paring Gouges
Long narrow blades with cranked neck, allowing the chisel blade to
be used flat on work surface. Cutting edge ground on inside giving
an outside cut. Blade about 8" long.
F1 1/4"x1/4" F2 1/2"x5/8" F3 3/4"x7/8"
F4 1"x1 1/4" F5 1 1/2"x1 3/4" |
|
|
Incannel
Paring Gouges
Long narrow blades used for deep section profiles, or precisely controlled
fluting. Blade about 8" long.
F6 1/4"x1/4" F7 1/2"x5/8" F8 3/4"x7/8"
F9 1"x11/4" F10 1/4"x6" |
|
|
Incannel
and Outcannel Firmer Gouges
Standard length carpenters chisels with gouge shaped blades.
Incannel gouges are ground inside giving an outside cutting edge.
Outcannel are ground outside giving an inside cutting edge. Blade
about 4" long.
Incannel Gouges -
F11 1/4" F12 3/8" F13 1/2"
F14 5/8" F16 1"
Outcannel Gouges -
F17 1/4" F18 3/4" F19 1/2"
F20 5/8" F21 3/4" F22 1" |
|
 |
Registered
Mortice Chisel
A specialist chisel designed for chiselling mortices but which can
also be used for heavy duty work. Blade
about 4 1/"" long.
F23 1/4" F24 1/2" F25 3/4"
F26 1" |
|
 |
Cranked
Bevel Edge Paring Chisels
The bent, or 'cranked neck' design of these special paring chisels
allows the craftsman to use the chisel with the blade absolutely flat
on the stock at all times. Blade about 8 3/4" long.
F27 1/4" F28 1/2" F29 3/4"
F30 1" F31 1 1/4" |
|
 |
Long
Thin Bevel Edge Paring Chisels
These chisels with relatively thin blades taper towards the cutting
edge. Blade about 8 3/4" long.
F32 1/4" F33 1/2" F34 3/4"
F35 1" F36 1 1/4" |
|
 |
Heavy
Duty Socket Firmer Chisel
These chisels have a thicker and longer socket than our bevel edge
model for added strength and durability. Blade about 8" long.
F44 1/2" F45 3/4" F46 1"
F47 1 1/2" F48 2" |
|
 |
Offset
Sockets
These
heavy duty offset socket chisels are used for getting into awkward
corners which you cannot reach with straight chisels.
F65 1/2"
F66
3/4"
F67 1"
F68 1/2"
F69
2" |
|
 |
Short
Cranks
These
shorter 4 1/2" blades are easier to control
than the standard longer models. Their offset handle design keeps
the blades perfectly flat on the workpiece and your hands out of the
way, improving cutting accuracy and making work in confined spaces
much easier.
F61 1/4"
F62
1/2"
F63
3/4"
F64
1" |
|
 |
Swan
Necks
A swan neck chisel is used to clean the bottom of mortices. The chisel
is levered in use, not struck. The 1/4" size can be used to clean
other sizes of mortices. Also available in sizes 5/16" &
3/8".
F70
1/4"
F71 5/16"
F72 3/8" |
|